Toyota engine 3S-FE/3S-FSE error codes list

The self-diagnosis codes are read by the number of flashes of the “CHECK ENGINE” indicator with closed “TC” – “CG” leads (pin 13 and 4) of the DLC3 connector under the dashboard and the ignition on.

See also: Toyota engine repair manuals

  • 12 – (P0335)  Crankshaft Position Sensor
  • 12 – (P0340)  Crankshaft Position Sensor
  • 13 – (P0335)  Crankshaft Position Sensor
  • 13 – (P1335)  Crankshaft Position Sensor
  • 14 – (P1300) Ignition System (No. 1)
  • 14 – (P1315) Ignition System (No. 4)
  • 15 – (P1305) Ignition System (No. 2)
  • 15 – (P1310) Ignition System (No. 3)
  • 18 – (P1346)  VVT-i system
  • 19 – (P1120) Accelerator Pedal Position Sensor
  • 19 – (P1121) Accelerator Pedal Position Sensor
  • 21 – (P0135)  Oxygen Sensor
  • 22 – (P0115)  Coolant Temperature Sensor
  • 24 – (P0110) Intake air temperature sensor
  • 25 – (P0171) Oxygen sensor  (lean signal)
  • 31 – (P0105) absolute pressure sensor
  • 31 – (P0106) absolute pressure sensor
  • 39 – (P1656)  VVT-i System
  • 41 – (P0120)  Throttle Position Sensor
  • 41 – (P0121)  Throttle Position Sensor
  • 42 – (P0500) Vehicle speed sensor
  • 49 – (P0190) Fuel Pressure Sensor
  • 49 – (P0191) Fuel pressure signal
  • 52 – (P0325) Knock  Sensor
  • 58 – (P1415) SCV Position Sensor
  • 58 – (P1416) SCV valve
  • 58 – (P1653) SCV valve
  • 59 – (P1349) VVT signal
  • 71 – (P0401) EGR Valve
  • 71 – (P0403)  EGR system
  • 78 – (P1235) TNVD
  • 78 – (P1235) TNVD
  • 89 – (P1125) ETCS Drive
  • 89 – (P1126) ETCS Coupling
  • 89 – (P1127) ETCS Relay
  • 89 – (P1128) ETCS Drive
  • 89 – (P1129) ETCS Drive
  • 89 – (P1633) Electronic control unit
  • 92 – (P1210) Cold Start Nozzle
  • 97 – (P1215) Spray Nozzles
  • 98 – (C1200) The vacuum sensor in the vacuum brake booster
Toyota 3S-FE/3S-FSE error codes list
Toyota 3S-FE/3S-FSE

Faults and engine repair 3S-FE / 3S-FSE / 3S-GE / 3S-GTE

The Toyota 3S engine is one of the most popular S-series engines and Toyota as a whole, appeared in 1984 and was produced until 2007. The 3S engine is a belt, every 100 thousand km the belt needs to be changed. During the entire production period, the engine was repeatedly refined, modified, and if the first models were carburetor 3S-FC, then the last is a 3S-GTE turbo with a capacity of 260 hp .

See also: Toyota repair manuals

Attention! Clicking on the link “download” you agree, after reading, delete the downloaded file from your computer. All content on the site Carmanualsclub.com is taken from free sources and is also freely distributed. If you are the author of this material, then please contact us in order to provide users with a pleasant and convenient alternative, after reading, buying a quality “original” directly from the publisher. The site administration does not bear any responsibility for illegal actions, and any damage incurred by the copyright holders.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.